foam-basement-walls / Green Building & Sustainable Home Renovation Information & Advice

Basements don't have to be moldy, that is the first thing to realize. It's easy to build a basement better, or to finish an existing basement correctly, we just need to realize that they behave differently than above grade walls and to build accordingly to effectively deal with the humidity found underground - and by d...

The most common practices currently employed for finishing basement interiors as living space rarely account for the impacts that come with the added moisture load below grade, or the amount of heat that will be lost to the ground. Existing basements are typically under-insulated or not insulated at all, and if they ar...

Polyisocyanurate (PIR), Extruded Polystyrene (XPS), Expanded Polystyrene (EPS) or Styrofoam? When building or renovating a high-performance building envelope there are really three main kinds of rigid foam panels you are going to have to choose from - Polyisocyanurate known as Polyiso (PIR), Extruded Polystyrene (XPS) ...

That musty, moldy basement smell that we have come to accept as unavoidable, is actually quite avoidable. The solution is really quite simple - stop building below grade with walls that were designed for above grade and your basement won't smell like old gym socks and potentially make you ill with mold spores. As a fre...

Are foam insulation panels a green choice? The short story is, maybe. And the long story is, well.... When we launched Ecohome about a decade ago, our mission was to create a green building website where homeowners and builders could learn how to make informed design and product choices and build sustainable, energy-ef...

  Insulating a basement is a great idea if it wasn't insulated when built, as before we began insulating foundation walls and below slabs (see slab on grade), it was generally estimated that basement heat loss accounted for about 1/3 of the total heat loss of a house. It is likely that such an abysmal starting place ma...

How to insulate house walls from the outside Adding extra insulation to the exterior walls of an older home when renovating or remodeling is a great way of improving a home's walls thermal performance and reducing energy use while reducing heating bills, carbon footprint and improving a building's comfort level. It may...

It is well-documented that indoor air is filled with contaminants, mostly due to cooking (specifically burning) and improperly vented combustion appliances (woodstoves, gas water heaters, gas ranges, etc.). Following that would be formaldehyde, VOCs and other chemicals in building materials and furnishings. All these f...

A frost protected shallow foundation (FPSF) is an interesting and well-proven alternative to deeper, more-costly foundations in cold regions with seasonal ground freezing and the potential for frost heave - and the simplest way to build a solid and dependable foundation is to use frost protected shallow foundation (FPS...

Siding installation The walls of your home are an environmental separator. Their job is to keep the inside in and the outside out. Exterior cladding or siding is your first line of defense against weather elements, and its job is to allow interior control layers (ie. the building envelope) to do their jobs without bei...

Should I Renovate, Remodel or Rebuild? This very question comes up a lot for me during site consultations with clients. Some people buy an old home, maybe inherit an old home, or are just tired of living in an old home and aren’t sure of the best course of action. We toil over the same decision with old cars; sometimes...