Tuck Tape is used to join and seal polyethylene vapor barrier joints.

• Adequate pressure must be applied to the tape.
• Must be applied to a clean, dry surface.
• The tape should be affixed to the center of the film overlap joint.
• 30mm of tape should be applied on each side of the overlap.

Benefits:

• Remarkable adhesion to polyethylene.
• Powerful, high-performance adhesion.
• Superior and lasting holding power.
• Helps prevent air infiltration.
• Resists mildew and humidity.
• Excellent resistance to ultraviolet rays.
• Evaluated by CCMC. Report # 14018-R
• VOC rate estimated at 0.1%