moldy-homes / Green Building & Sustainable Home Renovation Information & Advice

That musty, moldy basement smell that we have come to accept as unavoidable, is actually quite avoidable. The solution is really quite simple - stop building below grade with walls that were designed for above grade and your basement won't smell like old gym socks and potentially make you ill with mold spores. As a fre...

Crawlspace insulation - be careful to get it right A crawlspace comes with all the downsides of a basement, but it is just too low a space to be functional either beyond the folded plastic christmas tree and a couple of boxes of baubles. Unless there is a good reason for it, going through the process of pouring a footi...

Vapor Barrier + Air-Con = Damp Moldy Walls So here's a little known fact that most HVAC installers won't tell a potential new client for central air; Polyethylene vapor barriers in combination with air conditioning in homes can rot walls because of the condensation they may cause. This is why if you have a newer home w...

Mold in homes is a bad sign so how to get rid of it or prevent mold in drywall? Mold and mildew in homes develops in conditions of high humidity, most often in bathrooms, kitchens and basements, unless caused by roof leaks and other building envelope failures. Along with affecting the durability of your home, mold and ...

Homes built in the last 40 years in Canada are relatively airtight. Before that we generally relied on leaky uninsulated walls to provide fresh air and prevent mold and mildew, and they did that very well. Cost and comfort had us adding insulation, but not necessarily sealing our walls. The folly of this was quickly re...

Before embarking on any structural changes, it is most important to understand that the sound isolation between two homes is not determined only by the common wall or floor. All the other parts of the construction - side walls, ceilings, floors under walls - can transmit sound. Flanking sound transmission (see below), ...

For most of us, purchasing or building a home will be the biggest investment of our lives. This section is about knowing what to look for in new homes to get the best value for your dollar, or what to look for in a building lot for the same reasons. What to look for in a location: Being close to where you work and pla...

All homes need ventilation, whether natural or mechanical with an ERV or HRV system. Buildings and houses are no longer constructed leaking heat and moist air the way they used to be; we now build them as airtight as we can, especially Passive House or LEED certified homes. This makes mechanical ventilation essential i...

1. Hiring an architect: We discussed previously the idea of choosing an architect that specializes in high-performance Eco-friendly home design and can co-ordinate the work. They should be able to help you find general contractors and subcontractors that can help you carry out your work according to plan. This route is...

The most common practices currently employed for finishing basement interiors as living space rarely account for the impacts that come with the added moisture load below grade, or the amount of heat that will be lost to the ground. Existing basements are typically under-insulated or not insulated at all, and if they ar...

The first step to controlling sound transmission in buildings is assessing the situation. What kind of noise is it? Noise in buildings is usually assigned to one of three classes: Airborne sound: Sound such as voices, TV or stereo sounds. The source does not strike or vibrate against the structure of the building. Stru...