basement-spray-foam / Green Building & Sustainable Home Renovation Information & Advice

Basements don't have to be moldy, that is the first thing to realize. It's easy to build a basement better, or to finish an existing basement correctly, we just need to realize that they behave differently than above grade walls and to build accordingly to effectively deal with the humidity found underground - and by d...

New blowing agents for spray foam coming by the end of 2017 Foam insulation is a petroleum-based product and nothing will change that. But that was never the biggest problem the 'eco' building community had with foam insulation; the main issue was the inclusion of chemicals with a global warming potential (GWP) that wa...

There is a plethora of home improvement shows demonstrating how easy it is to buy, renovate and flip a house, and make some easy coin in the process. And when there is insulating to be done, it often seems people gravitate towards spray foam insulation. Why is that? Well, it works - at least in some ways. Spray foam ma...

Polyisocyanurate (PIR), Extruded Polystyrene (XPS), Expanded Polystyrene (EPS) or Styrofoam? When building or renovating a high-performance building envelope there are really three main kinds of rigid foam panels you are going to have to choose from - Polyisocyanurate known as Polyiso (PIR), Extruded Polystyrene (XPS) ...

Home Insulation - how much is too much? A House can definitely be under-insulated (millions of homes throughout the United States and Canada have this very problem), but can a home have too much insulation? In short, yes it can. In reality, there is an optimal balance between the up-front cost of insulation and the lon...

A frost protected shallow foundation (FPSF) is an interesting and well-proven alternative to deeper, more-costly foundations in cold regions with seasonal ground freezing and the potential for frost heave - and the simplest way to build a solid and dependable foundation is to use frost protected shallow foundation (FPS...

The most common practices currently employed for finishing basement interiors as living space rarely account for the impacts that come with the added moisture load below grade, or the amount of heat that will be lost to the ground. Existing basements are typically under-insulated or not insulated at all, and if they ar...

That musty, moldy basement smell that we have come to accept as unavoidable, is actually quite avoidable. The solution is really quite simple - stop building below grade with walls that were designed for above grade and your basement won't smell like old gym socks and potentially make you ill with mold spores. As a fre...

Insulating below slab-on-grade foundations Why insulate under a slab on grade foundation? For comfort, and to save money, that's why! In many areas Building Code has fallen behind common sense on what specification of insulation to use under a slab, It is common to install as little as R5 insulation below slab floors, ...

  Insulating a basement is a great idea if it wasn't insulated when built, as before we began insulating foundation walls and below slabs (see slab on grade), it was generally estimated that basement heat loss accounted for about 1/3 of the total heat loss of a house. It is likely that such an abysmal starting place ma...

LEED Platinum V4 Wall Design: Building Science  The wall we designed for the Edelweiss house, Canada's first LEED Platinum V4 Home is best categorized as a 'REMOTE' wall, a high performance building envelope developed by the Cold Climate Housing Research Centre in Alaska. REMOTE stands for 'Residential Exterior Membr...