Low-flow shower heads are worth the money

A more efficient shower head can pay for itself in 6 months of savings on your hydro bill.

EcoVéa,the intelligent shower
EcoVéa,the intelligent shower © Reveeco

So, let's start with this somewhat shocking reality -  the average Canadian will  use over 1.4 million litres of water per year, or about 4 to 5 times that of most European citizens. This is according to the SDWF (Safe Drinking Water Foundation).

That makes Canadians the second highest consumers of water in the world, surpassed only by the United States. For some perspective on how much water that really is, think of it like this -  a lot of the world lives on about one of our flushes per day, and not even clean water. 

Standard shower heads will use as much as 9.5 litres per minute (lpm), though there are still some being sold that use as much as 14 litres per minute. Some of the earlier low-flow models (which can still be found in the more affordable roadside motels) offer a completely unrewarding mist that can actually create a breeze and leave you chilled, or the ones with miniscule powerful jets that feel more like you're getting a tattoo than bathing. No one wants to leave a shower cold and in pain, so needless to say those weren't big sellers in residential homes.

Conclusions from an in-house test done by our Quebec office Ecohabitation shed some light on modern water saving fixtures. The consensus is that you can't actually tell the difference between a 9.5 lpm and a high quality 6.6 lpm showerhead.

So with comfort and cleanliness out of the way, let’s run the numbers. Calculations are based on the consumption of a family of four taking a daily shower for 10 minutes each at a temperature of 38 °C. This is an average (albeit decadent on a global scale) Canadian family consumption.

Based on that level of use, moving to a low-flow showerhead from a 9.5 lpm will save 42,340 litres of water and 1180 kWh of power per year. While hydro rates vary across the country, even in Quebec where they are among the cheapest, you will still see a savings of $102 annually in exchange for a one-time purchase, ranging in price from $10 to $50 depending on model and quality. Not many other investments offer that kind of return. 

What you should first look for when shopping is a showerhead that carries a  'Watersense' mark, and then the specific flow rate of the model you are looking at. Watersense is a certification issued by the Environmental Protection Agency, which looks at both flow rates and quality of components.

Other useful options:

Thermostatic mixing valve
Thermostatic mixing valve © Symmons

Flow-switch: You won't find this on all models, but a flow switch allows you to stop the water from flowing as you soap up, while maintaining the right temperature.

Thermostatic mixing valve: Rather than messing around with the hot and cold taps, you can  quickly select the water temperatures as well as prevent scalding by setting a maximum temperature. This is what comfort and efficiency in one package looks like.

Powerpipe greywater heat recovery system
Powerpipe greywater heat recovery system © RenewABILITY Energy Inc.

Power pipe: If you've ever heard the term 'greywater heat recovery', this is it. Before entering your water heater, the cold water feed goes through thin copper pipes wrapped around the drain. Heat from the draining water warms the incoming water before it enters the water heater. This is another big money and energy saver worth the investment.

Related topics: