much-insulation-basement-need / Green Building & Sustainable Home Renovation Information & Advice

  Insulating a basement is a great idea if it wasn't insulated when built, as before we began insulating foundation walls and below slabs (see slab on grade), it was generally estimated that basement heat loss accounted for about 1/3 of the total heat loss of a house. It is likely that such an abysmal starting place ma...

Home Insulation - how much is too much? A House can definitely be under-insulated (millions of homes throughout the United States and Canada have this very problem), but can a home have too much insulation? In short, yes it can. In reality, there is an optimal balance between the up-front cost of insulation and the lon...

Basements don't have to be moldy, that is the first thing to realize. It's easy to build a basement better, or to finish an existing basement correctly, we just need to realize that they behave differently than above grade walls and to build accordingly to effectively deal with the humidity found underground - and by d...

The most common practices currently employed for finishing basement interiors as living space rarely account for the impacts that come with the added moisture load below grade, or the amount of heat that will be lost to the ground. Existing basements are typically under-insulated or not insulated at all, and if they ar...

Insulating below slab-on-grade foundations Why insulate under a slab on grade foundation? For comfort, and to save money, that's why! In many areas Building Code has fallen behind common sense on what specification of insulation to use under a slab, It is common to install as little as R5 insulation below slab floors, ...

Radiant heating systems are very common in concrete floors now because they provide a very balanced and comfortable distribution of heat. Those systems are most commonly hydronic, meaning heated liquid is pumped through tubing in the concrete which then radiates that heat into the house. View the slab on grade foam for...

Polyisocyanurate (PIR), Extruded Polystyrene (XPS), Expanded Polystyrene (EPS) or Styrofoam? When building or renovating a high-performance building envelope there are really three main kinds of rigid foam panels you are going to have to choose from - Polyisocyanurate known as Polyiso (PIR), Extruded Polystyrene (XPS) ...

That musty, moldy basement smell that we have come to accept as unavoidable, is actually quite avoidable. The solution is really quite simple - stop building below grade with walls that were designed for above grade and your basement won't smell like old gym socks and potentially make you ill with mold spores. As a fre...

What is the difference between a slab on grade and a crawl space? A slab on grade, or ‘frost protected shallow foundation’ is exactly that, a slab of concrete on the ground. There’s more to it of course, but let’s start with a ‘win’ in the comprehension department shall we?  A slab on grade rests directly on the groun...

Home insulation - how much do you need and where to put it: Think of the heat in your home as if it were water behind a dam, and that insulation levels were the concrete wall of the dam. Would you choose the height of that concrete wall randomly, or would want an even level of concrete to hold back as much water as pos...

Crawlspace insulation - be careful to get it right A crawlspace comes with all the downsides of a basement, but it is just too low a space to be functional either beyond the folded plastic christmas tree and a couple of boxes of baubles. Unless there is a good reason for it, going through the process of pouring a footi...