insulating-foundations / Green Building & Sustainable Home Renovation Information & Advice

What is the difference between a slab on grade and a crawl space? A slab on grade, or ‘frost protected shallow foundation’ is exactly that, a slab of concrete on the ground. There’s more to it of course, but let’s start with a ‘win’ in the comprehension department shall we?  A slab on grade rests directly on the groun...

  Insulating a basement is a great idea if it wasn't insulated when built, as before we began insulating foundation walls and below slabs (see slab on grade), it was generally estimated that basement heat loss accounted for about 1/3 of the total heat loss of a house. It is likely that such an abysmal starting place ma...

Insulating below slab-on-grade foundations Why insulate under a slab on grade foundation? For comfort, and to save money, that's why! In many areas Building Code has fallen behind common sense on what specification of insulation to use under a slab, It is common to install as little as R5 insulation below slab floors, ...

Should I Renovate, Remodel or Rebuild? This very question comes up a lot for me during site consultations with clients. Some people buy an old home, maybe inherit an old home, or are just tired of living in an old home and aren’t sure of the best course of action. We toil over the same decision with old cars; sometimes...

Basements don't have to be moldy, that is the first thing to realize. It's easy to build a basement better, or to finish an existing basement correctly, we just need to realize that they behave differently than above grade walls and to build accordingly to effectively deal with the humidity found underground - and by d...

No matter that engineers and architects long ago debunked it, insulating paint still occasionally finds its way into buildings. Powdered ceramic chips that can be added to any paint are said to reflect heat in or out of a building and reduce heat loss by staggering amounts. I was under the impression that this had been...

The most common practices currently employed for finishing basement interiors as living space rarely account for the impacts that come with the added moisture load below grade, or the amount of heat that will be lost to the ground. Existing basements are typically under-insulated or not insulated at all, and if they ar...

Frost protected foundations - essential in cold climates Protecting homes and buildings in cold climates from structural damage caused by frost heave is essential for durability. In most parts of Canada and the northern United States, the ground freezes during the winter months to a depth of several feet. Such ground f...

Polyisocyanurate (PIR), Extruded Polystyrene (XPS), Expanded Polystyrene (EPS) or Styrofoam? When building or renovating a high-performance building envelope there are really three main kinds of rigid foam panels you are going to have to choose from - Polyisocyanurate known as Polyiso (PIR), Extruded Polystyrene (XPS) ...

Slab on Grade foundation, detail design; the basics There are many different soil conditions and corresponding slab designs. This page is about how to build a thickened edge concrete slab on grade FPSF footing on soil with a high water table to prevent frost heave, by first installing drainage below the slab.  Related ...

Crawlspace insulation - be careful to get it right A crawlspace comes with all the downsides of a basement, but it is just too low a space to be functional either beyond the folded plastic christmas tree and a couple of boxes of baubles. Unless there is a good reason for it, going through the process of pouring a footi...