choosing-basement-insulation / Green Building & Sustainable Home Renovation Information & Advice

  Insulating a basement is a great idea if it wasn't insulated when built, as before we began insulating foundation walls and below slabs (see slab on grade), it was generally estimated that basement heat loss accounted for about 1/3 of the total heat loss of a house. It is likely that such an abysmal starting place ma...

The most common practices currently employed for finishing basement interiors as living space rarely account for the impacts that come with the added moisture load below grade, or the amount of heat that will be lost to the ground. Existing basements are typically under-insulated or not insulated at all, and if they ar...

Polyisocyanurate (PIR), Extruded Polystyrene (XPS), Expanded Polystyrene (EPS) or Styrofoam? When building or renovating a high-performance building envelope there are really three main kinds of rigid foam panels you are going to have to choose from - Polyisocyanurate known as Polyiso (PIR), Extruded Polystyrene (XPS) ...

Basements don't have to be moldy, that is the first thing to realize. It's easy to build a basement better, or to finish an existing basement correctly, we just need to realize that they behave differently than above grade walls and to build accordingly to effectively deal with the humidity found underground - and by d...

Insulating below slab-on-grade foundations Why insulate under a slab on grade foundation? For comfort, and to save money, that's why! In many areas Building Code has fallen behind common sense on what specification of insulation to use under a slab, It is common to install as little as R5 insulation below slab floors, ...

That musty, moldy basement smell that we have come to accept as unavoidable, is actually quite avoidable. The solution is really quite simple - stop building below grade with walls that were designed for above grade and your basement won't smell like old gym socks and potentially make you ill with mold spores. As a fre...

Not all insulation materials are the same, and they are not always interchangeable A basic understanding of how walls work is needed to help you understand what you can reasonably expect insulation and building materials to do for you when they are part of a wall assembly. If you have a working knowledge of building sc...

There are many ways to build a slab-on-grade (or frost-protected shallow foundation), the following is a step-by-step walk though of a thickened-edge slab floor we built. XPS or EPS rigid foam is typically used under concrete slab floors, in this case we used mineral fiber insulation. Note: our mineral wool was provide...

What is the difference between a slab on grade and a crawl space? A slab on grade, or ‘frost protected shallow foundation’ is exactly that, a slab of concrete on the ground. There’s more to it of course, but let’s start with a ‘win’ in the comprehension department shall we?  A slab on grade rests directly on the groun...

First published in ecoHouse Canada The thermal performance of wall assemblies and insulation products has long been characterized using R-value, a metric which describes thermal resistance. While R-value is useful, it doesn’t tell the whole story about heat flow through building enclosures such as walls and roofs. Rece...

No matter that engineers and architects long ago debunked it, insulating paint still occasionally finds its way into buildings. Powdered ceramic chips that can be added to any paint are said to reflect heat in or out of a building and reduce heat loss by staggering amounts. I was under the impression that this had been...