basement-heat-loss / Green Building & Sustainable Home Renovation Information & Advice

Basement wall insulation
Insulation and soundproofing

Properly insulating basements and concrete slab floors

  Insulating a basement is a great idea if it wasn't insulated when built, as before we began insulating foundation walls and below slabs (see slab on grade), it was generally estimated that basement heat loss accounted for about 1/3 of the total heat loss of a house. It is likely that such an abysmal starting place ma...

The difference between air barriers and vapour barriers
Air and vapour barriers

The Difference between air barriers and vapor barriers

The difference between air barriers and vapor barriers The job of a vapor barrier is to prevent vapor diffusion, and the job of an air barrier is to stop air leakage through differences in air pressure. A wall system should have one vapor barrier, but can have many air barriers. A vapor barrier can act as a very effect...

How to insulate basements properly
Insulation and soundproofing

Best practices for basement insulation in new home construction

The most common practices currently employed for finishing basement interiors as living space rarely account for the impacts that come with the added moisture load below grade, or the amount of heat that will be lost to the ground. Existing basements are typically under-insulated or not insulated at all, and if they ar...

Basement Design for walls prevents mold & midlew when renovating & finishing
Healthy indoor air quality

Basement renovations: How to prevent mold when finishing basements

Basements don't have to be moldy, that is the first thing to realize. It's easy to build a basement better, or to finish an existing basement correctly, we just need to realize that they behave differently than above grade walls and to build accordingly to effectively deal with the humidity found underground - and by d...

Finished basements can lead to mold and mildew
Healthy indoor air quality

Why are basements moldy? How to fix or Prevent a Moldy Basement

That musty, moldy basement smell that we have come to accept as unavoidable, is actually quite avoidable. The solution is really quite simple - stop building below grade with walls that were designed for above grade and your basement won't smell like old gym socks and potentially make you ill with mold spores. As a fre...

Insulating a Slab on grade for a Passive Solar LEED Home with Rockwool © Ecohome
Insulation and soundproofing

Insulating below slab-on-grade floors

Insulating below slab-on-grade foundations Why insulate under a slab on grade foundation? For comfort, and to save money, that's why! In many areas Building Code has fallen behind common sense on what specification of insulation to use under a slab, It is common to install as little as R5 insulation below slab floors, ...

Correctly installed Triple pane south facing windows on Ecohome's Demo House
Windows and doors

Installing doors & windows for the best performance in high efficiency homes, LEED & Passive House

The importance of installing doors and windows correctly: Window and door openings are breaches in a building envelope that need to be carefully managed in order to prevent moisture damage and air leakage in homes as well as to save energy. Water leaks from around windows and doors are the visible result of a poor inst...

Top Tips for Getting a House Ready for Winter
Wall assemblies - renovation

Winter preparation for your home - are you ready for the cold?

Top Tips for preparing a home for winter Extremely low temperatures over winter can test your home in many ways, and sometimes your house will return a failing grade. Even brand new homes built to code can see failures of their building envelopes, windows, doors and ventilation systems during winter, a simple failure t...

Energy modeling simulation of heat loss through thermal bridging
Efficient home design

What is a thermal bridge and why is it so important to break it?

It is easy to look at the R value rating of a material and assume that our entire wall assembly matches it uniformly. But when you factor in the thermal bridges caused by framing materials and any discontinuities in the wall structure, you can also quickly deduce that this is not the case. It doesn't take expensive equ...

Radiant floor tube installation
Delivery: radiant, forced-air and decentralized

DIY radiant floor tubing installation video

Here is our DIY video of  how to lay down tubing for our radiant floor in the Edelweiss House. We have a 10 zone system, allowing floor temperatures in each room to be controlled independently. HePex tubing was provided by Uponor, who also use building plans to give customers a zone plan to follow making the install q...

Slab-on-grade for Ecohome's upcoming video building guide
Slab on Grade

how to build a slab-on-grade on standard soil

There are many ways to build a slab-on-grade (or frost-protected shallow foundation), the following is a step-by-step walk though of a thickened-edge slab floor we built. XPS or EPS rigid foam is typically used under concrete slab floors, in this case we used mineral fiber insulation. Note: our mineral wool was provide...